Equipment
Commerce Construction Corporation currently owns a fleet of waterborne equipment. Our barge-mounted cranes currently range in size from a 40 Ton Whirly, all the way up to a 4100 Ringer. In addition to our barge cranes, we also own various crawler cranes and specialty pile driving equipment, including augercast and drilling equipment. Lastly, our diving division features a vast collection of commercial diving gear, including a 50’ dive boat capable of supporting 4 divers simultaneously. For more information about our equipment and its capabilities please contact us @ 856-241-0300 or saz@commerceconstruction.com.
The JUNO is a 40 Ton Whirly mounted on a 42’ X 110’ spud barge. The JUNO is a converted steam rig that currently uses a high pressure 1600 CFM barge mounted compressor for power. Due to its speed, the JUNO is ideal for small to medium sized jobs where increased cycle times are valued heavily. This water rig has a relatively shallow draft and features three double drum deck engines, making it extremely valuable when working in and around piers, docks, or wharfs, that have high levels of river silt that are inaccessible by tugboat.
The VULCAN is a Manitowoc 4000W Crawler crane. Currently, it is positioned on a 50’ X 150’ spud barge and has the capability to lift nearly 50 tons. The VULCAN is a great machine for small to medium sized repair or pile driving jobs. Additionally, the VULCAN is a great choice for small to medium sized lift services and digging/dredging applications as well.
The Hercules is a Manitowoc 4600 SERIES 5 crawler positioned on a 58’ X 140’ spud barge. Typically the Hercules is used for medium to large-scale projects where lifts can vary anywhere from 1 ton to upwards of 115 tons. Recently this machine was used on a project where it was utilized to set small sections of structural steel walkways as well as to drive 36” Pipe Piles utilizing a 42 Ton Diesel Impact hammer and leads. The Hercules has been a very important component of our equipment list due to its wide spectrum of usefulness.
The Samson is a Manitowoc 4100W Ringer mounted on a 70’ X 140’ spud barge. The Samson is by far the largest machine Commerce Construction owns. The capabilities of the Samson are virtually endless when it comes to the typical scope of work seen on the Delaware River. Because of the fact that it is one of the largest waterborne cranes that calls the Delaware River home, it can rapidly be deployed on heavy lift services to clients based in the area, for a smaller mobilization cost. In addition to its 200 ton lift capacity, the Samson proves invaluable in today’s new marine construction realm. Recently, the trend has been to “build it bigger”. This includes utilizing bigger piles, larger pre-cast sections, and large “1 piece” structural steel dock/pier components.
Commerce Construction owns three machines that we utilize for land based foundation work of different types. We own a Kobelco CK 1000 and a Manitowoc 2900 which are both conventional crawler cranes and can be used for installing sheet piles, timber piles, augercast piles, h piles, and pipe piles. The third machine is a Junttan PM 20 pile rig which essentially has the same capabilities as the conventional cranes, however, it also has the unique ability to drive piles in tight locations. This method is commonly seen where existing structures typically prevent the traditional method of pile installation by swinging or fixed leads. Certain jobs allow the Junttan PM 20 to trump conventional cranes and their production rates, which is beneficial.
Commerce Construction also owns a 50’ LCM dive vessel capable of supporting (4) divers simultaneously. The 50’ LCM is able to be deployed on short notice for emergency situations. It is a self-contained dive command center. In addition to its dive capabilities, the boat features crews’ quarters, head, and heat/AC. Commerce Construction will typically utilize the dive vessel for pier inspections, salvage and recovery, as well as light towing duty.
Commerce Construction also owns an extensive inventory of pile hammers, drilling equipment, tractor railers, grout pumps, grout mixers, and miscellaneous equipment. For more information on Commerce Construction and our equipment capabilities, please call 856-241-0300 or email saz@commerceconstruction.com.
Equipment For Sale
Periodically Commerce will put our underutilized equipment up for sale. For a list of our current equipment for sale, please call 856-241-0300 or email saz@commerceconstruction.com.
